基于ANSYS的预应力CFRP布加固混凝土梁有限元分析

采用ANSYS有限元分析软件,对卸载或不卸载时预应力碳纤维(CFRP)布加固梁进行仿真分析,并在有限元分析中提出了施加预应力的方法(升温法),以及利用单元的生与死实现不卸载时加固的方法。通过实例对比分析表明,基于ANSYS的有限元分析结果与试验分析结果吻合较好,可在一定程度上有效替代试验分析方法,从而减少试验所需的时间和费用,对后续的CFRP布加固混凝土结构的研究工作具有一定的参考价值。     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.     

Bionic stab-resistant body armor based on triangular pyramid structure

A stab-resistant substrate was designed and realized with a triangular pyramidal structure, inspired by the biological armor model in nature. The stab-resistance behavior and dynamic response mechanisms were studied through numerical simulation and experimental testing of a knife impacting a substrate, and an optimal structural design was obtained accordingly, with a tilted angle of 22.5° and optimal thickness of 1.2 mm. It was shown that the triangular pyramidal structure generated twice the internal energy of the knife than the flat substrate due to the dispersing effect of the structure. The force parallel to the inclination caused a significant scratch on the substrate surface, while the force perpendicular caused obvious substrate deformation. A new riveting method was used to form the total layer, which passed the GA 68—2008 standard. The stab-resistant clothing coupled with the reduced wearing burden could provide effective protection and avoid fatal injuries on security personnel working in dangerous environments. The method provided may enlighten the future design and manufacturing of stab-resistant clothing.     

Dynamic necking of a near α titanium alloy at high strain rates:Experiments and modelling

The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement.     

间接边界元法模拟含裂纹介质中弹性波的传播

介绍了间接边界元法的基本理论,利用二维弹性动力边界积分方程解决了地震波在含裂纹介质中的散射问题。编写了地震波在二维非均匀介质中传播的数值模拟程序,模拟了爆炸点源在含裂纹介质中的传播情况,分析了裂纹的分布及填充物对波传播的影响。结果表明,边界元法是研究含裂纹介质中弹性波传播的有效工具。     

导弹测试系统中动态激励设备的调速控制与变频器的应用

导弹自动驾驶仪敏感部件功能状态的测试,是导弹实施综合测试内容的重要项目之一。实施敏感部件的测试的前提条件之一,是要有动态激励信号产生。产生动态激励信号的设备是动态激励装置。动态激励装置由驱动电机进行驱动。对驱动调速机构、调速原理以及变频器的应用,做出概要性阐述。     

复合材料偏心加筋壳特性分析

用任意加筋壳单元研究了复合材料偏心加筋壳结构的特性.研究表明,在结构几何尺寸已经确定的情况下,可以调整加强肋骨的偏心量,以改变加筋壳结构内部的受力和变形;调整加强肋骨的布置方式也是改变加筋壳结构强度和刚度的有效方法.     

长坑道中防护门上的化爆冲击波压力研究

为了对坑道中的防护门抗化爆冲击波进行有效的设计,先需确切知道作用在防护门上的反射压力。首先基于Hopkinson比例定律,用LS-DYNA动力有限元软件模拟了常规炸药在坑道入口外爆炸情况下,长坑道中自由场冲击波峰值压力的衰减规律,并由此确定作用在防护门上的反射压力。计算结果与其他经验方法的预测结果进行了比较。可供防护门的设计及动力响应研究参考。     

基于FLAMES和HLA的导弹分队作战仿真系统

研究了基于FLAMES和HLA导弹分队作战仿真。首先介绍了系统架构及工作流程,然后剖析了基于FLAMES和HLA进行导弹分队作战中的仿真实体之间的信息交互机制,最后探讨了基于FLAMES和HLA的开发过程,验证了基于FLAMES和HLA开发的导弹分队作战仿真的实用性,为以后分队作战智能化仿真研究提供借鉴。     

轴向应力波作用下的圆柱壳弹塑性后屈曲

为揭示柱壳屈曲变形的发展机理及屈曲波与弹塑性应力波耦合传播间的关系,运用非线性显示动力学有限元分析方法对承受轴向高速冲击载荷作用下柱壳的弹塑性后屈曲过程进行了研究。分析结果表明:对于柱壳在轴向高速冲击下的弹塑性轴对称动力屈曲,主要屈曲变形发生在柱壳的两端,屈曲变形的产生及发展与应力波在壳中的传播过程密切相关;塑性应力波在整个屈曲过程中起了绝对支配的作用;屈曲波的产生及发展,都与塑性波的传播及反射有关;弹性应力波由于在整个屈曲过程中持续的时间极短,处于次要的地位。